A printed broom!!! Very hard print. Adhesion is key…. the amount of strands is colossal and it will try to pull itself off the print bed. I used a brim to print this one. Make sure you have read the Bridging Techniques Tutorial and have tried some of the smaller prints first.
You need to be logged in to follow or unfollow 3DKreashunz.
Followers
Following
3DKreashunz isn't following anyone yet.
Portfolio:
+23
Contact :: Author
Please register or sign in first to contact 3DKreashunz.
0 comments
3DKreashunz
Author
December 21, 2014
I put a $1 price tag on this because it is a very difficult print. I don't want anyone to try it until you have tried some other files first and are confident that you can do it. If you want to try it and are somewhat advanced at 3D printing just send me a message and I will give it to you for free!
I put a $1 price tag on this because it is a very difficult print. I don't want anyone to try it until you have tried some other files first and are confident that you can do it. If you want to try it and are somewhat advanced at 3D printing just send me a message and I will give it to you for free!