Fidget Spinner that talks to you - Spyder3D World

Item Price

  • Quality checked by Spyder3D World
  • Future updates available
  • Comments

    0

    Sales

    1

https://youtu.be/dzPKYW_Gu9w Exactly what I was afraid of. These fidget spinners really start talking to you. They use an Atiny85 to display text with 5 leds in a row, using this Arduino sketch: The sketch is updated, so, take this one. //miniPOV int LED1 = 2; int LED2 = 1; int LED3 = 0; int LED4 = 4; int LED5 = 3; int t = 1; int d=3; void setup() { pinMode(LED1, OUTPUT); pinMode(LED2, OUTPUT); pinMode(LED3, OUTPUT); pinMode(LED4, OUTPUT); pinMode(LED5, OUTPUT); } void loop() { //H digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH);digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,HIGH); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,HIGH); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH);digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(d); //E digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH);digitalWrite(LED4,HIGH);digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,LOW); digitalWrite(LED3,HIGH); digitalWrite(LED4,LOW);digitalWrite(LED5,LOW); delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,LOW); digitalWrite(LED3,HIGH); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(d); //L digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH);digitalWrite(LED5,HIGH);delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(d); //L digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH);digitalWrite(LED5,HIGH);delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(d); //O digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH); digitalWrite(LED5,HIGH);delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,HIGH); digitalWrite(LED2,HIGH); digitalWrite(LED3,HIGH); digitalWrite(LED4,HIGH); digitalWrite(LED5,HIGH); delay(t); digitalWrite(LED1,LOW); digitalWrite(LED2,LOW); digitalWrite(LED3,LOW); digitalWrite(LED4,LOW); digitalWrite(LED5,LOW); delay(d); delay(10); } This sketch is for left handed. You have to spin clockwise. Right handed? Spin CCW. You also can reverse the text lines in the sketch. Batteries AG13. Bearing:D=19, d=6.3, h=5.5 mm. Tired of spinning? Just wave it. Red leds have a 220Ohm resistor. The other colors work with 120 Ohm. Trouble with placing the batteries? Heat the pushpins with a soldering iron and push them slightly into the wall.

Release date: September 22, 2017
Last updated: June 25, 2018
License
Design Category
Design Tag
Misc Notes
  • Portfolio:

Contact :: Author

Please register or sign in first to contact wdreumel.

There are no comments.

Processing...
Thank you! Your subscription has been confirmed. You'll hear from us soon.
Get the inside scoop on all things Spyder3D® by signing up for our email newsletter!
ErrorHere