Curiosity Mars Rover - Spyder3D World
© All Rights Reserved FyodorKrasniy
-
Comments
0Sales
4
No visual assembly instructions currently available, please refer to images for reference of assembly.
The model screw ratios are set by the 3mm plywood thickness. If using thinner or thicker material, please modify the screw lengths by the factor of thickness.
Eg: Use a 6mm screw when joining together 2 pieces of wood, in the same likeness a 12mm screw when joining 4 pieces and so on.
Screws required:
(9): M2 6mm
(2): M2 12mm
(5): M2 15mm
The model can be scaled to allow for rods or joiners other than screws. Feel free to modify.
The mars disk needs to be etched and cut. Please use your correct settings for both operations. Rover
Release date: | March 18, 2019 |
Last updated: | March 18, 2019 |
License | Creative Commons - Attribution - Non-Commercial |
Design Category | Laser Engraving & Cutting |
Design Tag | free, Kinetic, laser cut, Mars, Mars Rover, Plywood, Research, Space, toy, Wooden |
Misc Notes | SVG and PLT files are available in the Zip format for your use in Inkscape (Because nobody should be forced to use illustrator) Via La Open Source! |
Offline
There are no comments.