About the Design

Reduces the noise produced by the system when the pump is operating so that you can have a system in your living room or kitchen.

3Dponics is an open-source initiative, so feel free to download the source files and refine the designs. Share your tweaks and improvements with the Spyder 3D World community and collaborate with other members.

 

 

Spyder 3D World Mods – Original design had the cylinder opening as the base (vertical orientation). Spyder 3D World engineers added a flat base to one side of the cylinder and printed the cylinder in a horizontal orientation. This reduces the amount of bridging required to produce the internal baffles, resulting in a cleaner final print.

Tech Specs

Silencer

  • Filament: Abs
  • Print temp: 230-235
  • Bed temp: 95
  • Nozzle: .4
  • Later height: .2
  • Speed for infill: 40mm/s
  • Speed for perimeter: 40mm/s
  • speed for outside perimeter: 35mm/s
  • Travel speed: 60mm/s
  • First layer speed: 12mm/s
  • Flow rate: 100%
  • Infill: 20%

 

Click To View Full System

drip-system-parts

 

Share this with friends:
facebooktwittergoogle_plusredditlinkedintumblrmail